$122,000 including FET
Gooseneck design HRG - standard profile
Loaded 5th wheel height 49"
Swing radius 108"
Support cylinder Hydraulically operated
1) Hydraulic couplings: 3/4" fixed at front of gooseneck
2) Base section to include power pack aluminum hinged cover with paddle latches
and ALL plumbing for dealer installation of power pack
Power source
Gooseneck locks Removable adjustment block for 2" below standard road clearance
Electrical receptacle Seven pin connector
Coverplate Aluminum
Additional gooseneck specifications None
Deck section design Four beam
Deck section length 26'-0" (25'-6" clear)
Deck section width 8'-6"
Loaded road clearance 6"
Loaded deck height 20"
Flooring 1-1/2" apitong secured with deck screws; no lumber between main beams
Mainbeams 14" T-1A
Gooseneck/deck connection Horizontal pin and plate with remote lock
Deck/rear bridge connection Fixed/welded
Outriggers 12" swinging/removable with double hook-on at front of deck
Slope front of deck top down With plate and traction bars
Heavy duty front folding ramps 32" with smooth plate and traction bars
Between main beams 1st deck section at front and last deck section at rear, in front
of bucket well
Expanded metal
Bucket well, recess last 4 deck cross members in deck between main beams and
cover with 1/4" plate
Additional deck specifications
Loaded rear bridge height 41" main beams; 37" bolsters
Rear bridge section width 8'-6"
Number of axles 3
Axle capacity 25,000# - GAWR 24,700#
Axle spacing 54"
Brakes 16-1/2" X 7" air actuated with spring brakes on one axle
Anti-lock brake system None required - GVWR is greater than 120,000#
Ten (10) stud; 285.75mm BC aluminum/steel disc hub piloted system with oil
seals, inner wheels steel with outer aluminum wheels polished
Wheels
Tires Twelve (12) 275/70R22.5 (H) 16PR radials
Suspension Ridewell air
1) Over ride chains on all axles
2) Remote Talbert manual raising and lowering (+3", -3")
3) Air lift 3rd axle
4) Manual exhaust
Suspension options
Rear Bridge Center Section Boom well, cross members recessed - recess 1st member additionally
Wide center bolster With chain slots & flag holder slots
Rear half bolster Rear of axle 3 with flag holder slots
Front bridge ramp Sloped to deck outside of main beams with plate and traction bars
1) Omit 1st cross member in rear bridge section (shock mount cross member)
2) Connections for future 4th axle and axle extension
Additional rear bridge specifications
12 volt LED system including mid-turn lights, license plate light regular
1) 2 strobe lights at rear with switch
2) Battery pack with switch to flash strobes and lights when gooseneck is
disconnected
Lights and wiring
Paint Valspar standard Talbert black
20 total -
6 each side of deck (bent style)
2 each side between deck main beams in the first two deck sections (bent style)
2 each side mounted on side of deck bucket well plate in-line with the last two
cross members of deck (straight style)
Lash rings
Design notes Reinforced for 3 + 1 spread axle configuration
Additional general specifications None
