$69900 plus FET
RGN Lowboy
Gooseneck design Ratchet
Loaded 5th wheel height 51"
Swing radius 90"
Support cylinder Hydraulically operated with 4" x 3" cylinder mount cross member
Power source Hydraulic couplings: 3/4" fixed at front with piping for wet line
Gooseneck locks Ratchet
Electrical receptacle Seven pin connector
Coverplate Aluminum
1) Full penetration weld on gooseneck gusset
2) Base pivot tube reinforcement
Additional gooseneck specifications
2. DECK
Deck section design Four beam
Deck section length 24'-0" (23'-6" clear)
Deck section width 8'-6"
Loaded road clearance 6"
Loaded deck height 22"
Flooring 1-1/2" apitong secured with deck screws; no lumber between main beams
Gooseneck/deck connection Horizontal pin and plate with remote lock
Deck/rear bridge connection Fixed/welded
Outriggers 12" swinging/removable with double hook-on at front of deck
Slope front of deck top down With smooth plate & traction bars
Heavy duty front folding ramps 32" wood filled
Expanded metal Between main beams 1st deck section at front
Additional deck specifications None
3. REAR BRIDGE
Rear bridge section width 8'-6"
Loaded rear bridge height 36"
Page 1 of 4 - Order number SN40838
Talbert Manufacturing, Inc. 1628 W. State Road 114, Rensselaer, IN, USA (
Number of axles 2
Axle spacing 54"
Axle capacity 25,000# - GAWR 20,280#
Brakes 16-1/2" x 7" air actuated with spring brakes on one axle
Anti-lock brake system 2 sensor, 1 modulator system
Ten (10) stud; 285.75mm BC aluminum/steel disc hub piloted system with oil
seals, inner wheels steel with outer aluminum wheels Dura-Bright
Wheels
Tires Eight (8) 255/70R22.5 (H) 16PR radials
Suspension Ridewell air
Exhaust Valve Manual
Manual raising & lowering (+3"/-3") Talbert +3",-3" with over ride chains on all axles
Rear Bridge Center Section Boom well, cross members recessed - recess 1st member additionally
Wide center bolster With chain slots and flag holder slots
Rear half bolster Rear of axle 2
Front bridge ramp Sloped to deck outboard of main beams with smooth plate and traction bars
Additional rear bridge specifications None
4. GENERAL
12 volt system with the following:
All lights to be LED including mid-turn, excluding license plate light
3 marker lights each side of deck including mid-turn
Strobe lights and switch at rear
Battery back-up system with switch at rear to flash all marker/tail lights and strobe
lights, battery mounted in battery box
Lights and wiring
Paint Valspar standard Talbert black
8 total -
4 each side of deck (bent style), 8 total
Lash rings
Estimated empty weight 14,580#
