Specifications
| Condition | New |
|---|---|
| Make | Talbert |
| Model | 50 ton bus trailer |
| Gooseneck | Ratchet |
| Loaded 5th Wheel Height | 52" |
| Swing Radius | 84" with 24" flip up and removable gooseneck extension to provide a 108" swing radius |
| Deck Length | 22'-6" (22'-0" clear) |
| Deck Width | 8'-6" |
| Loaded Deck Height | 21" |
| Loaded Road Clearance | 5" |
| Winch | 20,000# planetary with air clutch and 2 function wireless remote, 100' cable and shackle |
| Axles | 3, 60" spacing |
| Axle Capacity | 25,000# - GAWR = 17,500# |
| Tires | Twelve (12) 245/70R17.5 (J) 18PR Michelin radials |
| Suspension | Ridewell air |
| Estimated Empty Weight | 23,160# without aluminum ramps |
Gooseneck
| Power Source | Hydraulic couplings: 3/4" fixed at front of gooseneck |
|---|
Deck
| Deck Section Design | Four beam |
|---|---|
| Flooring | 1-1/2" apitong secured with deck screws; no lumber between main beams |
| Deck/Rear Bridge Connection | Fixed/welded |
| Outriggers | 12" swinging/removable with double hook-on at front of deck |
| Slope Front of Deck Top Down | With smooth plate & traction bars |
| Ramps | Removable 32" with smooth plate and traction bars; removable 10'-0" aluminum ramp with storage provisions on gooseneck, for use at the front or rear of the trailer |
| Expanded Metal | Between main beams - full deck length up to deck boom well; steel plate with large drain holes under winch mount location |
Deck Features
- Flag holder each side at front with threaded keeper
- Bucket well: last 4 deck cross members recessed between main beams and covered with 1/4" plate
- Winch mounted between deck main beams approximately 42" rear of gooseneck base section, below main beams; cross members recessed as required to clear winch cable
- Hydraulic connection on both driver's side and curb side
Rear Bridge
| Rear Bridge Section Width | 8'-6" |
|---|---|
| Loaded Rear Bridge Height | 29" (maximum 8" above deck height) |
| Brakes | 12-1/4" x 7 1/2" air actuated with NO spring brakes |
| Wheels | Eight (8) stud steel disc hub piloted system with oil seals |
| Exhaust Valve | Manual |
| Rear Bridge Center Section | All cross members recessed |
| Wide Center Bolster | Yes (same height as deck height) |
| Front Bridge Ramp | Bump up ramp in front of first axle |
| Beavertail | 5'-0" horizontal beavertail (same height as deck height) |
Suspension Options
- Talbert +3",-3" with over ride chains on all axles
- Knob style hand valve (+3,-3) raising and lowering
- Air lift on axle 3
- Right Weigh digital scale
Rear Features
- Flag holder each side at rear with threaded keeper
- Rollers as required for winch operation
- Removable snatch block located at rear of trailer
Lash Rings
- 32 total: 11 each side of deck (bent style), 22 total; 1 each bolster end (straight style), 4 total; 2 each side of beavertail (bent style), 4 total; 2 at rear of trailer (bent style), 2 total
