3/8-Inch Chain with Twist Lock Grab Hooks on Each End available in 20' Length
Keeping a stationary vehicle tied down securely and firmly to take it to another location like a shop or lot requires hardware that you can trust day after day. You need to know that the vehicle will remain stabilized from point A to point B. This is where the Chain with Twist Lock™ Grab Hooks on Each End from B/A Products Co can be of help to you.
These strongly forged Grade 70 chains provide you with a Twist Lock™ Grab Hook on each end for that extra strength and grip you need each and every day. Available in length of 20' in 3/8″ size with a Working Load Limit of 6,600 lbs.
Please note: This style hook is not for overhead lifting.
Additional Information
Patented Twist LockTM Grab Hook Design Benefits:
- Easy to install, easy to use.
- Most secure latch on the market.
- Prevents accidental release of chain from hook connection.
- Prevents inadvertent re-hooking.
- For use with 1/4″, 5/16″, 3/8″, 1/2″ & 5/8″ size chains.
Normal Uses:
- Chain to chain hooking.
- Equipment safety chains.
- Over-the-road safety chains.
- Tie-down chains.
- Vehicle stabilization.
- Use in place of slip hooks.
Patent #: 7967353
WARNING: NEVER Exceed Working Load Limit
California residents: See Proposition 65 warning
Specifications
| Size (Inches) | 3/8 |
|---|---|
| Length (Feet) | 20 |
| Weight (lb) | 29 |
| Working Load Limit (lb) | 6600 |
| Warnings | NOT Approved for Overhead Lifting/Never exceed working load limit |
| Unit | EA |
| Chain Assembly | Safety Chain |
| Color | Yellow Zinc |
| Grade | Grade 70 |
| Hook Type | Twist Lock Cradle Grab Hook |
| Hook Color | Yellow Zinc |
| Link Type | None |
| Approved for Overhead Lifting | N |
| Meets or Exceeds DOT (Department of Transportation) Specifications | Y |
| Proposition 65 | Y |
| Patent Number | 7967353 |
