$46,500 including FET
In stock, ready to go! (1) Units available
DIMENSIONS
LENGTH 48'-0"
WIDTH 102", 97" between side rails.
HEIGHT Floor, approximately 59 1/2" high at front and 54" at rear.
COUPLING
COUPLER PLATE 1/4", 80 000 psi steel, plug welded structure.
KING PIN LOCATION 30" from front.
COUPLER HEIGHT 48".
STRUCTURE 44" c/c frame with "CAMBER".
FLANGES 3/8" x 5", high tensile.
WEB 1/4" plate in king pin area and the remaining in 3/16",
80 000 psi steel. 27" high at the peak.
with holes, parachute shaped, to lighten trailer.
GOOSENECK 11 1/4" high, with integrated nose ramp and 48" straight behind king pin.
CROSSMEMBERS I beams, 4" @ 3.2 lbs/ft, 80 000 psi steel, galvanised, 12" c/c.
FLOOR Apitong or equivalent, 1 1/8" thick shiplap finished, no preservative.
FLOOR FASTENING Screws
SIDE RAILS 10 gauge shaped 80 000 psi steel, 5" width x 5 11/16" height.
SIDE BOXES 3/16" steel plate, 1 5/8" x 3 5/8" interior, 4" high, (USA Dimensions).
Cargo pockets.
RUB RAILS 3/8" x 2 1/2" shaped steel.
CORNERS Bevelled.
X BRACES Between main beams, full length.
ENDS
FRONT RAIL Formed steel, bolted.
BUMPER CMVSS 223-RIG approved (in accordance with Canada & USA regulation).
Galvanized (G164) steel, bolted uprights to frames, 4" x 4" cross bar
formed tubing at a maximum height of 22" from under tubing
to ground.
BUMPER 2 rubber dock, at the end of rear rail.
REAR RAIL Formed steel.
ELECTRICAL
FRONT CONNECTOR 7 way (SAE J560).
ELECTRICAL SYSTEM Shock proof lights, polycarbonate lenses, in compliance with CMVSS 108.
MAIN SYSTEM Grote Ultra Blue LED, sealed beams, tail lights, markers lights "Dot",
identification lights (2 1/2" dia.), licence light.
FLASHERS Sealed beams LED, one lamp including side marker and flasher,
each side at middle point, amber.
LANDING GEAR AXN, (LG50DUN)
SAND SHOES 10" x 10".
CRANK Road side.
BOGIE Slider, Intraax AAZNT 46K, Z frame structure, 14 R.H., with "UHMV" slider
plastic pads, 4 retainers and 4 pneumatic locking pins "Quik Draw".
48" travel, tandem 49" spread.
MECHANICAL (GROUND AXLES)
SUSPENSION Hendrickson INTRAAX AANT-23K, tandem with AAZNT 46K.
For axles with bearings HM 218248 and HM 212049.
SPRINGS Air.
AXLE(S) LDA, 5 3/4" diameter, 23 000 lbs. capacity.
CAM SHAFTS 28 splines with enclosures, 10" long.
TRACK 77 1/2".
DUST SHIELDS None (Intraax axles).
BRAKES 16 1/2" standard, long life H20-HXS Hendrickson lining.
BEARINGS HM 218248 and HM 212049.
SLACK ADJUSTERS Meritor, automatic, 28 splines.
SEALS Stemco, "Guardian" type, with "Gearlube" mineral oil, SAE 80W90.
BRAKE CHAMBERS T.S.E. brake, "Omnibrake" (30-30), (push rod 9 3/4").
(4 years warranty by T.S.E. for parts only).
HUBS AND DRUMS 10 stud disc hubs, balanced drums outboard mount, 285.75mm B.C.,
single flange nuts.
For dual aluminum wheels.
RIMS 22.5 x 8.25, disc (10 holes),
285.75mm B.C., single flange nuts, 2 hand holes.
TIRES General, 11 R 22.5 HT+ 14 ply (41.1")
AIR SYSTEM
GLAD HANDS Fixed.
AIR VALVES Meritor Wabco, ABS, 2 sensors 1 modulator.
VALVE(S) Automatic blow down valve, WITHOUT control box,
ACCESSORIES
REGISTRATION HOLDER One plastic, Betts-PS-1 or equivalent.
MUD FLAPS One set, rubber with moose logo and vertical grooves to reduce spray.
SLIDING TRACK Full length, "LL" extruded aluminum, road side.
WINCHES Qty: 12, KINEDYNE #1020ZP, zinc plated slider (low profile 5 7/8").
FINISHING
PAINT Shot blasted, one coat of epoxy primer and one acrylic polyurethane top coats
Color: black, code: PPG CCA947255-55.
PAINT Galvanized Siderails, front sill, and rear sill
No paint or primer applied
BOGIE Finish with black soft coat.
RETROREFLECTIVE TAPES Conspicuity striping in compliance with CMVSS 108. Gray and red each side,
fully covers rear sill and horizontal underride protection bar.
WHEELS OR RIMS White (power top coat).
